work surface的例句大全

It can simply be left on the work surface.

把它放在操作台上就行了。

Tap each one firmly on your work surface to settle the mixture.

在工作台上逐个轻轻敲紧，让混合物变得密实。

Scrape the dough out onto a lightly floured work surface and press it down to flatten.

刮出面团放到洒了少许面粉的台面上,排除气体按扁面团.

Scrape the dough onto a lightly floured work surface.

刮出面团放到洒了少许面粉的台面上.

Areas for storing writing materials are grouped around the work surface.

地区储存书面材料是围绕工作表面.

Stretch to resize. Dimensions of work surface can be specified.

拉伸可调整大小. 可指定工作台面的尺寸.

She grabbed the parcel and slammed it down on a work surface.

她一把抓过包裹,啪的一下放在工作台面上.

Place the tortillas work surface and spread each generously with the sauce mixture ( Step 1 ).

将薄烙饼放平并涂上步骤1的混合酱.

Remove the seat back from the seat cushion and place it on a suitable work surface.

将座位靠背从座位垫上拆下,并将其放至适当的工作台上.

Machine rigidity of its structure can be double-sided operation, durable precision cutting work surface.

机器其结构刚性强、可双面操作, 裁切作业面精度持久.

Fixed, permanently open horizontal slot shall be provided 17 inches above the work surface.

排气槽水平方向离工作台面要有17英寸的距离.

In the present work discovering cutter mark of machining become surface fatigue crack fountain.

在试验过程中发现,疲劳裂纹源多为机加工留在表面的刀痕、划痕.

On using transitional shelf or ∏ support at the extremes of work surface to withstand coals reasonablely;

在工作面上下端头采用过渡支架或π型梁支护，合理顶煤；

This machine is used in the surface grinding process of disc type work.

本机床适用于盘类工件平面磨削加工.

Surface conditions will always be a hazard in quantitative work.

地表条件在定量测定中也是个困难.

The control surface plate timely and clearly shows work status of dry regeneration.

控制面板实时显示干燥再生工作状态,一目了然.

Though machine industry has automated highly, complex curved surface finishing is done by hand work of well-skilled workers, which is not only bigger in laboring intensity, but also lower product quality and finishing efficiency.

尽管机械工业目前已经实现了高度的自动化，但复杂曲面的光整加工却仍然停留在手工加工的方式上，不仅劳动强度大，而且产品质量差，加工效率低。

It can simply be left on the work surface

把它放在操作台上就行了。

Distribution of removed material in Fluid Jet Polishing ( FJP) was investigated in experiments. The characteristics of fluid velocity and pressure on the sample surface were simulated using Finite Element Method ( FEM) when the fluid jet impacts the work piece.

实验研究了液体喷射抛光技术的材料去除量分布特征，并利用有限元分析方法，分析了抛光头（液体柱）与工件表面相互作用时流场的分布特点。

Previous work in our laboratory has demonstrated that ultrafine amorphous alloys exhibited good catalytic behaviors in eAQ hydrogenation. However, their low surface area and poor thermal stability limit their industrial application.

已有实验室工作表明，超细非晶态合金在蒽醌选择加氢反应中有较好的催化性能，但是其比表面低、热稳定性差，大大限制了它的工业应用。